Isuzu Tilt Slide FYJ2000 Instruction Manual page 284

5-38
COMFORT AND CONVENIENCE
MEMO
MEMO
CH
Preset memory No.
NOTE
• The radio stations in memory will be erased when the power supply is
interrupted to change the battery, for example. You must then reprogram the
stations.
• Use the automatic storing function if reception of the preset memory stations is
poor.
Flashes
CH
Preset memory No.
CH
CH
LNU850SH005001
Programming Stations to Preset
Buttons
A maximum of 6 radio stations can be
stored in the channels in each of the AM1,
AM2, FM1 and FM2 bands.
1. While receiving a radio station,
press the "MEMO" button to go to
the storing-in-memory mode. The
channel number will flash on the
display.
2. Select the desired channel to which
you want to program the station
with the "CH" button. Press the
"MEMO" button again to complete the
presetting.
LNU850SH004901
After presetting radio stations in the
memory, press the "CH" button to receive
any of them.
The display will show the frequency of
the station now being received and the
corresponding channel number.
• When the reception is poor for the
preset radio stations, you may use
the automatic storing function. The
function allows the 6 stations with
best reception in the area where
you are driving to be automatically
programmed to channels 1 to 6
with the lowest frequency station
assigned to channel 1.
NOTE