Isuzu Tilt Slide FYJ2000 Instruction Manual page 338

7-10
SERVICE AND MAINTENANCE
CAUTION
• Tilt the cab only on a level surface.
• Check the areas in front of and above the cab for sufficient clearance when
tilting the cab indoors. (Particular care is required if your vehicle is equipped
with an air deflector.)
• When tilting the cab, close the left and right doors securely. You should avoid
opening or closing the doors when the cab is tilting.
• Confirm that people are not near the vehicle or inside the cab when tilting the
cab.
• While buzzer is sounding, stay out from under cab.
• The muffler and exhaust pipe will be very hot immediately after driving. Use all
due caution to avoid accidentally touching these when doing a cab tilt operation.
• Do not tilt the cab when objects are placed on or in the instrument panel, seats,
cup holders or on floor.
• Tilt the cab only with the engine turned off.
• Make sure everything has been removed from the roof rack.
• Remove any ice or snow accumulating on the top of the bumper before tilting
the cab. Failure to do so could damage the bumper, lights or other vehicle
components.
• When you must unavoidably open or close a tilted cab's door, securely support
the weight of the door while opening or closing it. It is dangerous to release the
door from your hand when it is being opened or closed. The door could hit you
or someone and cause an injury or the door could be damaged. Confirm that
the door is completely shut after closing it.
Tilting the Cab
Preparations for Tilting the Cab