Isuzu Tilt Slide FYJ2000 Instruction Manual page 566

8-38
IN CASE OF EMERGENCY
WARNING
• Use an Isuzu genuine part when replacing the slow-blow fuse.
• Do not use any material other than designated slow-blow fuses. Using other
materials could cause a serious malfunction or fire.
• If the new slow-blow fuses blow right away, contact the nearest Isuzu Dealer.
NOTE
• If an overload exists in the circuit from the battery, the slow-blow fuse will melt
before the wiring harness is damaged.
Replacing Slow-blow Fuses
When the headlights and other devices in
the electrical system do not work, but there
is no problem with the fuses, check the
slow-blow fuse.
Replace the slow-blow fuse when it blows.
Please contact the nearest Isuzu Dealer.
Slow-blow fuses protect the electrical
circuits, and they are installed so that
they can be quickly replaced if there is a
malfunction.