Isuzu Tilt Slide FYJ2000 Instruction Manual page 557

Replacing the Clearance Lights
CAUTION
• Tilt the cab only on a level surface.
• Check the areas in front of and above the cab for sufficient clearance when
tilting the cab indoors.
• When tilting the cab, close the doors securely. You should avoid opening or
closing the doors when the cab is tilted.
• Do not tilt the cab when objects are placed on or in the instrument panel, seat,
cup holder or on floor.
• Remove any ice or snow accumulating on the top of the bumper before tilting
the cab. Failure to do so could damage the bumper, headlights, back panel tray
or other components.
• When you must unavoidably open or close a tilted cab's door, securely support
the weight of the door while opening or closing it. It is dangerous to release the
door from your hand when it is being opened or closed. The door could hit you
or someone and cause an injury or the door could be damaged. Confirm that
the door is completely shut after closing it.
IN CASE OF EMERGENCY
1. Tilt the cab and work from
front-sideways of the vehicle for the
replacement.
Tilting the Cab → Refer to page 7-10
2. Remove the clearance light socket
from the headlight assembly.
8-29