Isuzu Tilt Slide FYJ2000 Instruction Manual page 369

Checking the Engine Coolant
CAUTION
• If you continue running the engine while the warning lamp is on, or when engine
coolant is leaking, the engine is liable to seize.
SERVICE AND MAINTENANCE
When the engine is cold, check the level
of engine coolant in the radiator sub-tank.
The level should be between the "MAX"
and "MIN" lines. If the engine coolant level
is lower than the "MIN" line, replenish it by
filling up to the "MAX" line. Check to make
sure there are no leaks from the radiator
or radiator hoses. Check for fluid or stains
on the ground showing leaks where the
vehicle is parked. Also, inspect the radiator
hose for a crack and damage. When a
water leakage or damage is found on the
hose, contact the nearest Isuzu Dealer.
Check the engine coolant concentration
at an Isuzu Dealer. For concentration
determination, refer to page 7-39. If the
concentration is not as specified, adjust the
concentration.
Adding Engine Coolant
When is no longer sufficient engine coolant,
open the cap on the radiator sub-tank
and add engine coolant to the "MAX" line.
Following this, tighten the cap securely.
•
ADVICE
If the level of engine coolant
changes rapidly, have your vehicle
inspected at the nearest Isuzu
Dealer.
7-41