Isuzu Tilt Slide FYJ2000 Instruction Manual page 416

7-88
SERVICE AND MAINTENANCE
Spare Tyre
Installation and Removal
Removal
Insert the spare tyre carrier handle in the
spare tyre carrier and turn the handle
counterclockwise.
Installation
V
1. Place the tyre with the convex side
of the disc wheel facing up and then
fit the carrier hanger plate inside the
disc wheel with its claws properly
engaged.
2. Check that the chain is not twisted.
3. Insert the spare tyre carrier handle
into the carrier and turn the spare
tire carrier handle clockwise to wind
up the chain. Do not twist the chain
while winding it up. The hanger plate
should be at right angles with the
carrier when the spare tyre reaches
the storage position.
CAUTION
• If the chain is twisted when it is
wound, it becomes loose while
running due to vibrations or shocks
and the tyre might fall off; this is
very dangerous.
4. After winding up the chain, additionally
turn the spare tyre carrier handle with
a force of at least 294 N (30 kgf/66 lb)
to fix the tyre in place.
5. Pull out the spare tyre carrier handle
from the carrier without reversing it.