Isuzu Tilt Slide FYJ2000 Instruction Manual page 556

8-28
IN CASE OF EMERGENCY
Bulb(glass)
Socket
LNU880SH002501
3. Remove the rubber boot. Then push
the right side of the clip that holds the
bulb in place and slide it upwards to
disengage the clip.
4. Pull off the bulb and replace with a
new one.
5. After replacing the bulb, install the
parts in the reverse order to removal.
ADVICE
• Do not touch the glass of the bulb
with your hand. Soiling the glass will
cause the bulb to blow out.
• When attaching the rubber boot,
press in both the outside and inside
circumference of it. Make sure
that the rubber boot, the headlight
assembly, and the bulb are securely
installed without any raised section.
If the rubber cover is not firmly in
place, water could get inside the
headlight and lead to a breakdown.