Replacing the Rear Turn Signal Light, Taillight, Stop Light
Replacing the License Plate Light
1-light type
2-light type
IN CASE OF EMERGENCY
and Backup Light
1. Loosen the screws and remove the
lens.
2. Loosen the bulb by turning it
counterclockwise while pushing it.
3. To install the lights, follow the removal
procedure in reverse.
1. Loosen the screws and remove the
cover.
2. Remove the lens.
3. Loosen the bulb by turning it
counterclockwise while pushing it.
4. To install the lights, follow the removal
procedure in reverse.
8-33