Isuzu Tilt Slide FYJ2000 Instruction Manual page 398

7-70
SERVICE AND MAINTENANCE
Single-tyre wheel
Dual-tyre wheel
Identification Marks on Wheel Bolts/Nuts
Every wheel bolt or nut has a mark
indicating the type of wheel to which the
bolt or nut is applicable ("ST" for steel
wheels; "AL" for aluminum wheels; or
"S·A" for common use). A right-hand screw
(marked as R, " ") is exclusively used for
a right-hand wheel, whereas a left-hand
screw (marked as L, "
used for a left-hand wheel.
ADVICE
• When changing aluminum wheels
to steel wheels or vice versa, also
replace wheel bolts and nuts with
those designed exclusively for the
specific wheel type.
When temporarily installing a steel wheel
on an aluminum rear wheel tire, use the
special inner nuts marked "ST○".
") is exclusively