7-30
SERVICE AND MAINTENANCE
Replace the oil separator element according to the maintenance schedule.
Changing the Engine Oil Separator Element
Engine Oil Separator Element
Maintenance Schedule
→ Refer to page 7-163
1. Remove the cap, and secure it by
hanging it into the space created
among the EGR valve, priming
pump bracket and PCV hose. Lift the
element up in the direction inserting it
into the cap while avoiding the lower
end to get stuck with the engine oil
separator unit.
2. Pull the bottom of element out of the
engine.
3. Install a new element. Also, replace
the O-ring at the same time.
4. For installation, perform the same
sequence of operations in reverse.