Isuzu Tilt Slide FYJ2000 Instruction Manual page 280

5-34
COMFORT AND CONVENIENCE
Display (example)
Adjusting the Time
Press the "DISP" button to make the
display show the time of day.
Time is shown in the 12 hour clock.
Setting the Clock to Time Signal
Press the "RESET" button to set your clock
to time signal. The time will be reset to the
nearest hour according to the currently
displayed minutes as indicated in the
figure.
Adjusting the Time
Press the upward (minutes) or downward
(hours) "TUNE" button while pressing the
"T.ADJ" button to adjust the time. Check the
time on the display during the adjustment.
• The time display will flash when the
power supply is disconnected and
then reconnected due to the battery
change for example. Adjusting the
time again will stop the flashing.
NOTE