Table of Contents
Advertisement
4-92
CONTROLS AND INSTRUMENTS
ADVICE
•
When you are not using the cruise control, be sure to press the cruise control
main switch to the "OFF" position.
•
When you turn the starter switch to "ACC", press the cruise control main switch
to the "OFF" position once and then make setting again to use the cruise
control.
If the cruise control is canceled by any of the following, you can resume cruise control
driving at the original set speed when you turn and release the cruise control resume
switch. As soon as the resume switch is released, the cruise control set indicator light
comes on.
• The brake pedal is depressed.
• The clutch pedal is depressed.
• The exhaust brake is engaged.
• The transmission is changed.
• The cruise control cancel switch is pressed.
ADVICE
•
When the vehicle comes to a halt (0 km/h / 0 MPH), the original cruise control
setting cannot be recovered by using the resume switch. You must then reset
the cruise control.
Reengaging the Cruise Control
- Quick Links:
- Vehicle Information
- Main Data
Hide quick links:
Advertisement
Table of Contents
