Isuzu Tilt Slide FYJ2000 Instruction Manual page 257

COMFORT AND CONVENIENCE
Maximum Cooling
Set the outlet selector knob (1) to the "
position.
Press the A/C switch (5) to the "ON"
position. Move the air source lever (2) to
the " " position.
Turn the temperature control knob (3) fully
towards the low-temperature direction.
Set the fan speed control knob (4) to the
maximum speed position.
• After prolonged parking under the
sun, open the windows or doors to
ventilate the cab interior and release
the heat before turning the air
conditioning system on.
• Prolonged use of the air conditioning
system in the maximum cooling
setting will make the interior air
become stale. Occasionally move
the air source lever to the outside
air ventilation position or open the
windows to allow fresh air into the
cab.
• During cooling operation, mist may
appear coming out of the air outlets.
This results from quick cooling of
humid air, and does not indicate any
problem.
NOTE
5-11
"