Isuzu Tilt Slide FYJ2000 Instruction Manual page 228

4-100
CONTROLS AND INSTRUMENTS
11. Check that there are no air leaks. Also
12. On a model equipped with trailer hand
13. Raise the landing gear of the trailer
Decoupling of Trailer
Decouple the trailer in the reverse order of
coupling.
1. Set the trailer parking brake and block
2. Lower the landing gear of the trailer
3. Disconnect the service air line hose,
4. Push the lock lever forward of the
5. Slowly move the tractor forward to
• Do not place anything on the
platform. It may come in contact
with the trailer during a turn, and
damage the vehicle or prevent safe
driving.
check that the lights of the tractor and
trailer operate correctly.
brake, with the brakes applied to the
trailer wheels by pulling the trailer
hand brake lever, slowly start the
vehicle. Repeat the above operation
two or three times to make sure that
the connection is complete between
the trailer and tractor.
fully, release the trailer's parking
brake and remove the chocks.
the wheels with chocks.
until it touches the ground.
emergency air line hose and jumper
cable. Attach the disconnected
air hoses to the hangers on the
tractor and the jumper cable to the
receptacle.
vehicle while pulling the release wire
to open the jaw.
decouple it from the trailer.
CAUTION