Isuzu Tilt Slide FYJ2000 Instruction Manual page 326

6-26
TIPS ON SAFE AND SMOOTH OPERATION
Cross
chain
Connector
(curled end)
How to Fit a Tyre Chain
Hook
MFU9Z0MH000601
Clip
Chain band
MFU9Z0SH014201
1. Making sure the tyre chain is not
twisted, place it on the tyre such that
the curled ends are on the outside (the
side that will make contact with the
ground).
2. Pull both ends of the tyre chain as far
as possible. Couple the inner hooks
first, and then couple the outer hooks.
3. The hook should be connected such
that it is flat against the tyre side face.
Also, confirm that there is no twisting
or bending in the chain.
4. Retain any excess portion of chain
with wire so it does not hit the
vehicle's body or brake pipes.
5. Hook the clips over the chain band
(with the clips pointing outward) such
that the clips are evenly positioned
around the band.
6. After fitting the tyre chains and
driving for a while, check whether the
chains are loose or they have come
unfastened.