Isuzu Tilt Slide FYJ2000 Instruction Manual page 351

SERVICE AND MAINTENANCE
Adding the Engine Oil
If the engine oil level is in the vicinity of
the "MIN" mark on the oil dipstick, remove
the oil filler cap from the filler hole, and
replenish the engine oil after removing the
oil dipstick. Use only the specified engine
oil.
•
•
•
WARNING
When adding oil, be careful not to
spill any, but keep a workshop rag
handy just in case there are any
spills.
If any oil should spill onto the
engine, carefully wipe it away. If this
precaution is not taken, the spilled oil
could ignite and a fire could spread.
Do not leave flammable items, such
as rags or gloves, in the engine
compartment. They could cause a
fire.
The engine oil is hot after driving, so
when changing the oil after driving,
be careful not to be scalded.
7-23