Isuzu Tilt Slide FYJ2000 Instruction Manual page 486

7-158
SERVICE AND MAINTENANCE
Cleaning a Belt Webbing
1. Fully extract the belt and examine for
any difference in color between the
front and back surfaces.
2. Mix one part neutral detergent into
approximately twenty parts warm
water.
3. Wet a nail brush or another similar
brush having soft bristles (of nylon or
the like) in warm water, and use this
to clean away dirt.
4. Wipe the seat belt dry using a dry
cloth, and then allow it to dry naturally
out of direct sunlight.
5. Check to be sure the seat belt retracts
and pulls out correctly.
ADVICE
• Check to see if the seat belt fails to
retract properly, the mounting part
is loose, a metal part is deformed,
or the belt is damaged, frayed, or
faded. If you find an abnormality,
contact the nearest Isuzu Dealer.