Isuzu Tilt Slide FYJ2000 Instruction Manual page 560

8-32
IN CASE OF EMERGENCY
Replacing the Fog Light
Connector
Cover
MFU780SH003801
V
1. Disconnect the connector, and
turn the cover counterclockwise to
disconnect it.
While pushing the clip that holds the
bulb in place, slide it downward.
2. Disengage the terminal from the cover
and replace with a new bulb.
ADVICE
• Do not touch the glass of the bulb
with your hand. Soiling the glass will
cause the bulb to blow out.
3. To install the lights, perform the same
sequence of operations in reverse
taking care of the following points:
• Since there are different notches on
the bulb on top and bottom (rounded
or square), pay attention to the
direction of insertion when installing.
- The square notch should face up
on both the left and right sides.
• Turn the cover clockwise to lock it.
When locking the cover, be sure
that the harness will not be caught
in the cover.
ADVICE
• If the socket is not locked securely,
water could get inside the light and
lead to a breakdown.