Kruger Ecowatt K320 Series Operation Manual page 60

Ecowatt Drive K320 series
®
Note: If fault occurred, rule out the fault cause according to "Fault handling".
The running command channel can be set by terminal commands besides P00.01 and P00.02.
Current running
command channel
P00.01
Keypad
Terminal
Communication
Note: "/" means this multi-function terminal is valid under current reference channel.
Related parameter list:
Function
code
Speed control
P00.00
Channel of
P00.01
commands
Communication
P00.02 mode of running
commands
Motor parameter
P00.15
autotuning
Multi-function
terminal function (36)
Command switches to
keypad
/
Keypad
Keypad
Name
0: Sensorless vector control (SVC) mode 0
1: Sensorless vector control (SVC) mode 1
2: Space voltage vector control mode
3: Closed-loop vector control mode
mode
Note: To select 0, 1, or 3 as the control mode,
enable the VFD to perform motor parameter
autotuning first.
0: Keypad
running 1: Terminal
2: Communication
0: Modbus/Modbus TCP
1: Profibus/CANopen/DeviceNet
2: Ethernet
3: EtherCAT/Profinet/EtherNetIP
4: Programmable expansion card
5: Wireless communication card
0: No operation
1: Rotary autotuning.
Comprehensive motor parameter autotuning. It
is recommended to use rotating autotuning
when high control accuracy is needed.
2: Static autotuning 1 (comprehensive
autotuning); static autotuning 1 is used in
cases where the motor cannot be disconnected
from load.
Multi-function
terminal function (37)
Command switches to
terminal
Terminal
/
Terminal
Description
-51-
Basic operation guidelines
Multi-function
terminal function (38)
Command switches to
communication
Communication
Communication
/
Default
2
0
0
0