Ecowatt
Drive K320 series
®
A.3 Wiring
1.
Ground a shielded cable as follows:
Grounding position of
the shielded cable
2.
Wire an expansion card as follows:
A.4 IO expansion card——EC-IO501-00
The terminals are arranged as follows:
CME and COM are shorted through J3 before delivery, and J5 is the jumper for selecting the
output type (voltage or current) of AO2.
Figure A-4 Expansion card grounding diagram
EC wiring
EC wire binding position
Figure A-5 Expansion card wiring
Grounding position of the
shielded cable
-309-
Expansion cards