Kruger Ecowatt K320 Series Operation Manual page 41

Ecowatt Drive K320 series
®
Item
10
11
Display
12
area
13
Other 14
15
The LCD has different display areas, which show different contents under different interfaces.
The following figure shows the main interface in stop state.
Stop/
Reset key
Direction key
Up:
Down:
Left:
Right:
Display
LCD
screen
RJ45
RJ45 interface
interface
Battery Clock battery
cover cover
USB Mini USB
terminal terminal
Description
In running state, pressing this key can stop
running or autotuning; this key is limited
by P07.04. In fault alarm state, all the
control modes can be reset by this key.
Up: Its function varies with the interface
(Example: shifting up the
displayed/selected item and changing
digits)
Down: Its function varies with the interface
(Example: shifting down the
displayed/selected item and changing
digits)
Left: Its function varies with the interface
(Example: switching the monitoring
interface, shifting the cursor leftward, and
returning to the previous menu)
Right: Its function varies with the interface
(Example: switching the monitoring
interface, shifting the cursor rightward, and
entering the next menu)
240*160 dot-matrix LCD, able to display
three monitoring parameters or six
sub-menu items simultaneously.
The RJ45 interface is used to connect to the
VFD.
To replace or mount the clock battery,
remove this cover, and then close the cover
after the battery is mounted.
The mini USB terminal is used to connect
to the USB flash drive through an adapter.
-32-
Basic operation guidelines