Kruger Ecowatt K320 Series Operation Manual page 248

Ecowatt Drive K320 series
®
Function
Name
code
CD signal zero
P24.13
offset gain
Encoder type
P24.14
selection
Speed
P24.15 measurement
mode
Frequency
P24.16 division
coefficient
Pulse filter
P24.17
handling selection
Description
0–65535
Ones place: Incremental encoder
0: without UVW
1: with UVW
Tens place: Sin/Cos encoder
0: without CD signal
1: with CD signal
0: PG card
1: local; realized by HDIA and HDIB;
supports incremental 24V encoder only
0–255
When the function code is set to 0 or 1,
frequency division of 1:1 is implemented.
0x0000–0xFFFF
Bit0: Enable/disable encoder input filter
0: No filter
1: Filter
Bit1: Encoder signal filter mode (set Bit0 or
Bit2 to 1)
0: Self-adaptive filter
1: Use P24.18 filter parameters
Bit2: Enable/disable encoder
frequency-division output filter
0: No filter
1: Filter
Bit3: Reserved
Bit4: Enable/disable pulse reference filter
0: No filter
1: Filter
Bit5: Pulse reference filter mode (valid
when Bit4 is set to 1)
0: Self-adaptive filter
1: Use P24.19 filter parameters
Bit6: Frequency-divided output source
setting
0: Encoder signals
1: Pulse reference signals
Bits7–15: Reserved
-239-
Function parameter list
Default Modify
0
○
0x00
◎
0
◎
0
○
0x0033
○