Keypad Display; Displaying Stopped-State Parameters - Kruger Ecowatt K320 Series Operation Manual

Ecowatt Drive K320 series
®
Area
Corresponding
Footer F menus of function
keys 4, 5 and 6

5.3 Keypad display

The VFD keypad can display the stopped-state parameters, running-state parameters, function
parameter editing status, and fault alarm status.

5.3.1 Displaying stopped-state parameters

When the VFD is in stopped state, the keypad displays stopped state parameters, and this
interface is the main interface during power-on by default. In stopped state, parameters in
various states can be
displayed. Press
16:02:35
Forward
Set frequency
P17.00 Hz
DC bus voltage
P17.11 V
Digital input terminal state
P17.12
Monitoring
Press or to switch between different display styles, including list display style and
progress bar display style.
16:02:35 Forward
Set frequency
P17.00 Hz
DC bus voltage
P17.11 V
Digital input terminal state
P17.12
Monitoring
The stopped display parameter list is user defined, and each state variable function code can
be added to the stop display parameter list as needed. The state variable which has been added
to the stop display parameter list can also be deleted or shifted.
Name
Corresponding menus of function keys 4, 5 and 6. The
corresponding menus of function keys 4, 5 and 6 vary
with interfaces, and the contents displayed in this area
are also different.
or to shift the displayed parameters upward or downward.
Local Ready 01: K320
50.00
540.0
0x0000
About
Menu
Figure 5-3 Stopped state parameters
Local Ready 01: K320
50.00
540.0
0x0000
About
Menu
Figure 5-4 Displaying a stopped state parameter
Displayed contents
16:02:35
Forward
DC bus voltage
P17.11 V
Digital input terminal state
P17.12
Digital output terminal state
P17.13
Monitoring
16:02:35 Forward
Set frequency
Hz
0.00
Return
-34-
Basic operation guidelines
Local Ready 01: K320
540.0
0x0000
0x0000
About
Menu
Local Ready 01: K320
50.00
630.00
Homepage