Basic Operation Guidelines; What This Chapter Contains; Keypad Introduction - Kruger Ecowatt K320 Series Operation Manual

Ecowatt Drive K320 series
®

5.1 What this chapter contains

This chapter describes how to operate the VFD by using the keypad.

5.2 Keypad introduction

The VFD has been equipped with the LCD keypad as a standard configuration part. You can
use the keypad to control the start and stop, read status data, and set parameters of the VFD.
Note:
The LCD keypad is equipped with a real-time clock, which can run properly after being

installed with batteries even if the power line is disconnected. The clock battery (type:
CR2032) is user purchased.
The LCD keypad has the parameter copying function.

If you need install the keypad on another position rather than on the VFD, use M3 screws

or a keypad installation bracket for fixing, and use a keypad extension cable with a
standard RJ45 crystal head.
Item
Status
1
indicator

5 Basic operation guidelines

1
12
5
4
3
7
11
9
Figure 5-1 Keypad diagram
RUN
2
13
6
8
10
15
Description
VFD running status indicator.
LED off: The VFD is stopped.
LED blinking: The VFD is autotuning
parameters.
LED on: The VFD is running.
-30-
Basic operation guidelines
14