Kruger Ecowatt K320 Series Operation Manual page 40

Ecowatt Drive K320 series
®
Item
2
3
4
5
6
7
Key area
8
9
Description
TRIP
QUICK/JOG
Function key
Short-cut key
Confirmation
key
Run key
-31-
Fault indicator.
LED on: in fault state
LED off: in normal state
LED blinking: in pre-alarm state
Short-cut key indicator, which displays
different state under different functions,
see definition of the QUICK/JOG key for
details.
The function of function key varies with
the menu;
The function of function key is displayed in
the footer.
Re-definable. It is defined as JOG function
by default, namely jogging. The function of
short-cut key can be set by the ones of
P07.12, as shown in the following.
0: No function
1: Jogging (linkage indicator 3; logic : NO);
2: Reserved
3: FWD/REV switch-over (linkage indicator
3; logic: NC)
4: Clear UP/DOWN setting (linkage
indicator 3 logic: NC)
5: Coast to stop (linkage indicator 3; logic:
NC) ;
6: Switching running command reference
mode in order (linkage indicator 3; logic:
NC)
7: Reserved
Note: After restoring to default values, the
default function of short-cut key 7 is 1.
The function of the confirmation key varies
with menus, such as confirming parameter
setting, confirming parameter selection,
and entering the next menu.
When the VFD is controlled by the keypad,
this key is used to run the VFD or perform
autotuning.
Basic operation guidelines