Kruger Ecowatt K320 Series Operation Manual page 191

Ecowatt Drive K320 series
®
Function
Name
code
Running
P08.06
frequency of jog
P08.07 ACC time for jog
P08.08 DEC time for jog
P08.09 Jump frequency 1 When the set frequency is within the
Jump frequency
P08.10
amplitude 1
P08.11 Jump frequency 2
Jump frequency
P08.12
amplitude 2
P08.13 Jump frequency 3
Jump frequency
P08.14
amplitude 3
Amplitude of
wobbling
P08.15
frequency
Amplitude of
P08.16 sudden jump
frequency
Description
The function code is used to define the
reference frequency during jogging.
Setting range: 0.00Hz–P00.03
output frequency)
ACC time for jogging means the time
needed for the VFD to accelerate from
0Hz to the max. output frequency
(P00.03).
DEC time for jogging means the time
needed for the VFD to decelerate from
the max. output frequency (P00.03) to
0Hz.
Setting range: 0.0–3600.0s
range of jump frequency, the VFD runs
at the boundary of jump frequency.
The VFD can
resonance points
frequencies. The VFD supports the
setting of three jump frequencies. If the
jump frequency points are set to 0, this
function is invalid.
Set frequency f
Jump
frequency 3
Jump
frequency 2
Jump
frequency 1
Setting range: 0.00Hz–P00.03
output frequency)
0.0–100.0% (of the set frequency)
0.0–50.0% (of the amplitude of wobbling
frequency)
-182-
(Max.
avoid mechanical
by setting jump
1/2* jump amplitude 3
1/2* jump amplitude 3
1/2* jump amplitude 2
1/2* jump amplitude 2
1/2* jump amplitude 1
1/2* jump amplitude 1
Time t
(Max.
Function parameter list
Default Modify
5.00Hz
○
Model
○
depended
Model
○
depended
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
○
0.0%
○
0.0%