Kruger Ecowatt K320 Series Operation Manual page 203

Ecowatt Drive K320 series
®
Function
Name
code
ACC/DEC time of
P09.15
PID command
PID output filter
P09.16
time
P09.17 Reserved
Low-frequency
P09.18
integral time (Ti)
Low-frequency
P09.19 differential time
(Td)
Low-frequency
point of PID
P09.20
parameter
switching
High-frequency
point of PID
P09.21
parameter
switching
P09.22–
Reserved
P09.28
P10 group––Simple PLC and multi-step speed control
Function
Name
code
Simple PLC mode
P10.00
Simple PLC
P10.01
memory selection
Description
0.0–1000.0s
0.000–10.000s
0.00–10.00s
0.00–10.00s
0.00–P09.21
P09.20–P00.04
Description
0: Stop after running once; the VFD stops
automatically after running for one cycle,
and it can be started only after receiving
running command.
1: Keep running in the final value after
running once; The VFD keeps the running
frequency and direction of the last section
after a single cycle.
2: Cyclic running; the VFD enters the next
cycle after completing one cycle until
receiving stop command and stops.
0: No memory after power-off
1: Memory after power-off; PLC memories
its running stage and frequency before
power-off.
-194-
Function parameter list
Default Modify
0.0s
○
0.000s
○
0.90s
○
0.00s
○
5.00Hz
○
10.00Hz
○
Default Modify
0
○
0
○