Table of Contents
Advertisement
Ecowatt
Drive K320 series
®
Function
Name
code
AVR function
P00.16
selection
VFD type
P00.17
Function
P00.18
parameter restore
P01 group––Start and stop control
Function
Name
code
P01.00
Start mode
Description
cases where the motor cannot be
disconnected from load.
3: Static autotuning 2 (partial autotuning);
when the present motor is motor 1, only
P02.06, P02.07 and P02.08 are autotuned;
when the present motor is motor 2, only
P12.06, P12.07 and P12.08 are autotuned.
4: Rotary autotuning 2. Similar to rotary
autotuning 1, but it is valid only for AMs.
5: Static autotuning 3 (partial autotuning),
valid only for AMs.
0: Invalid
1: Valid during the whole procedure
The auto-adjusting function of the VFD
can eliminate the impact on the output
voltage of the VFD because of the bus
voltage fluctuation.
0: Reserved
1: P type
0: No operation
1: Restore default values
2: Clear fault records
Note: After the selected operation is
performed,
the
automatically restored to 0. Restoring the
default
values
may
password. Exercise caution when using
this function.
Description
0: Direct start
1: Start after DC braking
2: Speed tracking restart 1
3: Speed tracking restart 2
-137-
function
code
delete
the
user
Function parameter list
Default Modify
1
○
0
◎
0
is
◎
Default Modify
0
◎
Advertisement
Table of Contents
