Kruger Ecowatt K320 Series Operation Manual page 217

Ecowatt Drive K320 series
®
Function
Name
code
P13.10 Reserved
Maladjustment
P13.11
detection time
High-frequency
P13.12 compensation
coefficient of SM
High-frequency
P13.13
injection current
P13.14–
Reserved
P13.19
P14 group––Serial communication
Function
Name
code
Local
P14.00 communication
address
Description
running frequency is lower than the value
of the function code, the phase-locked loop
is disabled; and
frequency is higher
phase-locked loop is enabled.
Setting range: 0–655.35
The function code is used to adjust the
responsiveness of
function. If the load inertia is large,
increase the value of the function code
properly, however, the responsiveness
may slow down accordingly.
Setting range: 0.0–10.0s
The function code is valid when the motor
speed exceeds the rated speed. If motor
oscillation occurred, adjust the function
code properly.
Setting range: 0.0–100.0%
0–300.0%
Description
Setting range: 1–247
When the master writes the slave
communication address to 0 indicating a
broadcast address in a frame, all the
salves on the Modbus/Modbus TCP bus
receive the frame but do not respond to it.
Local communication address is unique in
the communication network, which is the
basis for point-to-point communication
between the upper computer and the VFD.
Note: The communication address of a
slave cannot be set to 0.
-208-
when the running
than that, the
anti-maladjustment
Function parameter list
Default Modify
0.5s
○
0.0%
○
20.0%
◎
Default Modify
1
○