Kruger Ecowatt K320 Series Operation Manual page 182

Ecowatt Drive K320 series
®
Function
Name
code
Description
11: AI2 input (0–10V)
12: AI3 input (0–10V/0–20mA)
13: HDIA input(0.00–50.00kHz)
14: Value 1 set through Modbus/Modbus
TCP (0–1000)
15: Value 2 set through Modbus/Modbus
TCP (0–1000)
16: Value
PROFIBUS/CANopen/DeviceNet (0–1000)
17: Value
PROFIBUS/CANopen/DeviceNet (0–1000)
18: Value 1 set through Ethernet 1 (0–1000)
19: Value 2 set through Ethernet 2 (0–1000)
20: HDIB input (0.00–50.00kHz)
21: Value
EtherCat/Profinet/EtherNetIP (0–1000)
22: Torque current (bipolar, 0–Triple the
motor rated current)
23: Exciting current (bipolar, 0–Triple the
motor rated current)
24: Set frequency (bipolar, 0–Max. output
frequency)
25: Ramp reference frequency (bipolar,
0–Max. output frequency)
26: Rotational speed (bipolar, 0–Speed
corresponding to max. output frequency)
27: Value
EtherCat/Profinet/EtherNetIP (0–1000)
28: C_AO1 (Set P27.00 to 1. 0–1000)
29: C_AO2 (Set P27.00 to 1. 0–1000)
30: Rotational speed (0–Twice the motor
rated synchronous speed)
31: Output torque (Actual value, 0–Twice
the motor rated torque)
32–47: Reserved
-173-
1 set through
2 set through
1 set through
2 set through
Function parameter list
Default Modify