System Control Keys; Softkeys And Softkey Control; Softkey Control Keys; Softkeys - Agilent Technologies 4396B Gpib Programming Manual

System Control Keys

-
Shift Page Up
4 5 4 5
(Recall)
- (Run)
Alt F3
4 5 4 5
-
4 Alt 5 4 F2 5
(Continue)
(IBASIC)
4 F12 5

Softkeys and Softkey Control

There are eight softkeys (labeled
of the analyzer's screen.

Softkey Control Keys

Pressing the following:
4 F9 5
-
4 Shift 5 4 F9 5

Softkeys

and keys leads to the IBASIC menu. Pressing a softkey performs the command labeled
F9 F10
4 5 4 5
or produces a sequence of characters on the keyboard input line (or on the \current line" in
the EDIT mode).
Pressing the softkeys on the front panel of the analyzer performs the same functions as
pressing the through
4 f1 5
C-4 The Keyboard
- (Recall) recalls the last line the you entered, executed,
Shift Page Up
4 5 4 5
or deleted. Several previous lines can be recalled this way. Recall is
particularly handy to use when you mistype a line. Instead of retyping the
entire line, you can recall it, edit it using the editing keys, and enter or
execute it again.
- moves forward through the recall stack.
4 Shift 5 4 Page Down 5
Starts a program running from the beginning.
Resumes program execution from the point where it paused.
Allows you to type BASIC commands on Keyboard Input Line. If Display
Allocation is ALL INSTRUMENT, pressing this key changes the Display
Allocation to BASIC STATUS.
- changes Display Allocation to ALL INSTRUMENT.
4 Shift 5 4 F12 5
through
4 f1 5
Leads to the IBASIC menu, which controls programs and the editor.
leads to the BASIC menu from which to control a BASIC program. This
menu is the same menu displayed when pressing
the front panel.
In the edit mode, pressing
provides softkeys to conveniently enter BASIC commands.
- (User) leads to the ON KEY LABEL menu, which are user
Shift F10
4 5 4 5
de ned softkeys in a BASIC program. (For information on getting to this
menu through the Instrument BASIC, see \On Key Label Function" in
Chapter 8.)
function keys.
4 f8 5
). The softkey labels are indicated on the right
4 f8 5
leads to the Edit System menu, which
F10
4 5
from
NNNNNNNNNNNNNNNNNNNN
SYSTEM
4 5