Figure 1-7 Trace display in single enlarged window in trace control mode
Figure 1- 7
information on the pulse and associated X and Y control.
33 This is the X and Y trace setup fields. Using the
34 The current settings of the X and Y scale are displayed in this reporting
35 This table shows 8 automatic time measurements performed on the first
N1911A/1912A P-Series Power Meters User's Guide
34
33
shows a single enlarged window with the Trace Ctrl menu with
highlight the item and change its value.
line.
complete captured pulse after the trigger. The 8 measurements are rise
time
, fall time
negative occurrence
cycle 50.0 % and pulse repetitive frequency 12.5 kHz.
, time to positive occurrence
, pulse period
Introduction
35
or
keys you can
, time to
, pulse width
1
, duty
17