Launching An Application Automatically - Intermec CK3a1 User Manual

8 Tap Yes to continue with the clean boot. The computer performs a
InstallSelect Software Components
Component Name Description
Data Collection &
Intermec Settings
Funk Wireless
Security
Printer Support
Intermec DHCP
Client
Bluetooth
Avalanche Enabler Enables the client to the Wavelink Device Management
Depending on the options you selected for your CK3, you may see
other components available from the InstallSelect application.

Launching an Application Automatically

There are two ways to automatically launch your application when
you perform a reset on the computer:
•
•
AutoRun.exe automates operations on your CK3. You can configure
AutoRun.exe through the AutoRun data file (AutoRun.dat). For
compatibility with other Intermec computers, you can place a copy of
AutoRun.exe in the same folder as your AutoRun.dat file.
CK3 Mobile Computer User's Manual
Chapter 3 — Developing and Installing Applications
clean boot and restarts with all of the checked components
installed.
Data collection and Intermec Settings. Also includes
on-unit SDK libraries.
If you disable this .cab file, you cannot scan or collect
data on the device and you cannot use Intermec
Settings.
Intermec security supplicant that provides a wireless
security solution with several features that are not
supported by Microsoft.
Provides Intermec printer driver support.
Provides the Intermec DHCP client application.
Provides the Intermec Bluetooth application support.
solution.
Make sure your .cab file places a shortcut to your application in
the \Windows\StartUp folder.
Configure AutoRun.exe to launch your application.
59