Enter; Enter Accumulate Mode - Intermec Trakker Antares 2410 System Manual

Or: You can create your own bar code labels to delete files by creating a bar
Example: To delete the file SHIPPING.BIN from drive C, use this command:

Enter

Description: Enters the current data record and remains in Accumulate mode. If no
From Network: Not supported
Keypad or Menu: Not supported
Scan:

Enter Accumulate Mode

Description: Enters Accumulate mode. You can accumulate data from a series of bar
From Network: Not supported
Keypad or Menu: Not supported
Scan:
Trakker Antares 2400 Family System Manual
2 Scan the bar code labels for the file you want to delete. You can scan
labels from the "Full ASCII Bar Code Chart" on page 284. The label
must use this format:
drive:filename
3 Scan this bar code label to exit Accumulate mode and delete the file.
Exit Accumulate Mode
*-/*
*-/*
code in this command format:
..--drive:filename
..--c:shipping.bin
data exists, a null string is entered.
Note: The Enter command consists of a Start and Stop character and does
not contain any data values. Therefore, if the terminal is configured for a
decoded input device, which requires at least one data value in a bar code,
it cannot scan the Enter command. For a list of decoded input devices, see
your user's manual or contact your local Intermec sales representative.
Enter
**
**
code labels and enter them as a single label.
Enter Accumulate Mode
*+/*
*+/*
Chapter 5—Reader Command Reference
103