Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
5 A outputs are provided for fan coil applications.
NOTICE
Improper switching will destroy the fan motors.
Follow the technical data for the fan, e.g. step or two-way switching.
For more information:
6.3
Physical address assignment
The physical address, group address and parameters are assigned and programmed in ETS.
The device features a Programming button for physical address assignment. The red
Programming LED lights up after the button has been pressed. It goes off as soon as ETS has as-
signed the physical address or the Programming button is pressed again.
The device performs an ETS reset during physical address programming. This resets all states.
6.4
Software/application
6.4.1
Download response
Due to the complexity of the device, the progress bar for the download may take up to one and a
half minutes before it appears depending on the PC used.
6.4.2
Copying, exchanging and converting
The ABB Update Copy Convert application can be used to copy or exchange parameter settings
and to convert the application version. The application is available free of charge from the KNX on-
line shop.
It also provides the following functions:
•
Update: Changes the application program to a later or earlier version while retaining current
configurations
•
Convert: Transfers/adopts a configuration from an identical or compatible source device
•
Channel Copy: Copies a channel configuration to other channels on a multichannel device
•
Channel Exchange: Exchanges configurations between two channels on a multichannel device
•
Import/Export: Saves and reads device configurations as external files
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 86
Hide quick links:
Advertisement
Table of Contents
