5.1.5.
5.1.6.
54
COM600 series, Version 5.0
Data Historian Operator's Manual
Figure 5.1.4-2 Zoom out
Zooming out
1. Right-click in the plot area and select Zoom Out.
2. The Zoom Out command can be selected as long as the number of zooms in com-
mands is larger than the number of zoom out commands. To return to the original
state, zoom out until the Zoom Out command is disabled.
3. Release the time span by clicking pins ( ). This re-enables the refreshing of the
time span and the graphs (at the end double-click, in which case the pin statuses on
the updated display should be
Copying data to clipboard
Figure 5.1.6-1 Copying data to clipboard
--
).
1MRS756739
Zoom_out.jpg
Copy_Data_to_Clipboard.jpg