YASKAWA GA700 Technical Manual page 1025

■
o4-12: kWh Monitor Initialization
No.
Name
(Hex.)
o4-12 kWh Monitor
Initialization
(0512)
Note:
When you initialize the drive with A1-03 [Initialize Parameters], the drive will not reset U4-10 and U4-11.
0 : No Reset
Keeps the monitor values for U4-10 and U4-11.
1 : Reset
Resets the values of U4-10 and U4-11. After the reset, the drive automatically resets o4-12 to 0.
■
o4-13: RUN Command Counter @ Initialize
No.
Name
(Hex.)
o4-13 RUN Command
Counter @ Initialize
(0528)
0 : No Reset
Keeps the monitor values for U4-02, U4-24, and U4-25.
1 : Reset
Resets the values of U4-02, U4-24, and U4-25. After the reset, the drive automatically resets o4-13 to 0.
■
o4-22: Time Format
No.
Name
(Hex.)
o4-22 Time Format
(154F)
RUN
Sets the display of the time shown in the upper-left of the LCD keypad screen.
0 : 24 Hour Clock
1 : 12 Hour Clock
2 : 12 Hour JP Clock
■
o4-23: Date Format
No.
Name
(Hex.)
o4-23 Date Format
(1550)
RUN
Sets the date format that the drive uses for the fault history and other records.
0 : YYYY/MM/DD
1 : DD/MM/YYYY
2 : MM/DD/YYYY
Note:
The Fault History in the Monitor Mode shows when faults occurred. Refer to
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Resets the monitor values for U4-10 [kWh, Lower 4 Digits] and U4-11
[kWh, Upper 5 Digits].
V/f CL-V/f OLV CLV AOLV
Resets the monitor values for U4-02 [Num of Run Commands], U4-24
[Number of Runs (Low)], and U4-25 [Number of Runs(High)].
V/f CL-V/f OLV CLV AOLV
Sets the time display format. This parameter is only available when using an
LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the date display format. This parameter is only available when using an
LED keypad.
11.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Show Fault History on page 176
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0 - 2)
Default
(Range)
0
(0 - 2)
for more information.
11
1025