Using Digi Remote Manager; Access Digi Remote Manager; Using The Web Interface - Digi TX54 User Manual

Configuration and management

Using Digi Remote Manager

By default, your TX54 device is configured to use Digi Remote Manager as its central management
server. No configuration changes are required to begin using the Remote Manager.
For information about configuring central management for your TX54 device, see
management.

Access Digi Remote Manager

To access Digi Remote Manager:
1. If you have not already done so, go to
Remote Manager account.
Check your email for Digi Remote Manager login instructions.
2. Go to remotemanager.digi.com.
1. Enter your username and password.
The Digi Remote Manager Dashboard appears.

Using the web interface

To connect to the TX54 local WebUI:
1. Use an Ethernet cable to connect the TX54's ETH2 port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
TX54 User Guide
https://myaccount.digi.com/
Using Digi Remote Manager
Central
to sign up for a Digi
48