Digi TX54 User Manual page 237

Wi-Fi
(config)> network wifi ap digi_ap1 ssid_broadcast true
(config)>
6. Set the security for the access point to a personal security option:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is one of:
psk: Uses WPA Personal (PSK). All Wi-Fi clients must support WPA to be able to
n
authenticate.
mixedpsk: Uses mixed WPA/WPA2 Personal (PSK) mode. Wi-Fi clients that support WPA
n
and WPA2 are able to authenticate.
psk2: Uses WPA2 Personal (PSK) mode. All Wi-Fi clients must support WPA2 to be able
n
to authenticate.
psk2sae: Uses WPA2-PSK/WPA3-AES mixed mode. Wi-Fi clients that support WPA2 and
n
WPA3 are able to authenticate.
sae: Uses WPA3 Personal mode. All Wi-Fi clients must support WPA3 to be able to
n
authenticate.
(config network wifi ap new_AP)> encryption type psk2sae
(config network wifi ap new_AP)>
7. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap1 isolate_client true
(config)>
See Isolate Wi-Fi clients
access points from communicating with each other.
8. Set the password that clients will use when connecting to the access point:
(config)> network wifi ap digi_ap1 encryption key_psk2 password
(config)>
9. (Optional) Change the Wi-Fi radio for the access point (dual-Wi-Fi models only):
a. Show available radios:
(config)> network wifi radio ?
Additional Configuration
---------------------------------------------------------------------
----------
wifi1
wifi2
(config)>
TX54 User Guide
Configure a Wi-Fi access point with personal security
for information about how to prevent clients connected to different
Wi-Fi1 radio
Wi-Fi2 radio
237