Digi TX54 User Manual page 72

Interfaces
3. Create a new interface, or edit an existing one:
To create a new interface, see
n
or Configure a Wide Area Network (WAN)
(WWAN).
To edit an existing interface, change to the interface's node in the configuration
n
schema. For example, for a interface named my_wan, change to the my_wan node in
the configuration schema:
(config)> network interface my_wan
(config network interface my_wan)>
4. Enable SureLink.
SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WAN (wan1) and WWANs (wwan1 and, for dual-cellular models,
wwan2). It is disabled for IPv6.
When SureLink is configured for Wireless WANs, SureLink tests are only run if the cellular
modem is connected and has an IP address. Use the SIM failover options to configure the
TX54 device to automatically recover the modem in the event that it cannot obtain an IP
address. See
(config network interface my_wan> ipv4 surelink enable true
(config network interface my_wan)>
5. Set the device to reboot when the interface is considered to have failed:
(config network interface my_wan ipv4 surelink)> reboot true
(config network interface my_wan ipv4 surelink>
Note If both the restart and reboot parameters are enabled, the reboot parameter takes
precedence.
6. (Optional) Set the number of times that the Surelink test must fail before the device is
rebooted:
(config network interface my_wan ipv4 surelink)> reboot_attempts int
(config network interface my_wan ipv4 surelink>
where int is any number greater than 0. The default is 1.
7. Add a test target:
(config network interface my_wan)> add ipv4 surelink target end
(config network interface my_wan ipv4 surelink target 0)>
8. Set the test type:
(config network interface my_wan ipv4 surelink target 0)> test value
(config network interface my_wan ipv4 surelink target 0)>
TX54 User Guide
Configure a
Configure a Wireless Wide Area Network (WWAN)
Wide Area Networks (WANs)
LAN, Configure a Wide Area Network
or Configure a Wireless Wide Area Network
for details about SIM failover.
(WAN),
72