Command line interface
client
> show wifi
3. To display a syntax diagram and parameter information:
> show wifi ap ?
Display details for Wi-Fi access points.
Syntax: ap [all] [name {digi_ap1|digi_ap2}]
Parameters
------------------------------------------------------------------------
--
all
name
> show wifi ap
Use the Tab key or the space bar to display abbreviated help
When executed from the root command prompt, pressing the Tab key or the space bar displays an
abbreviated list of available commands:
><space>
config
exit
more
mv
system
traceroute update
>
Similar behavior is available with any command name:
> config network interface <space>
..
loopback
> config network interface
Auto-complete commands and parameters
When entering a command and parameter, press the Tab key to cause the command line interface to
auto-complete as much of the command and parameter as possible. Typing the space bar has similar
behavior. If multiple commands are available that will match the entered text, auto-complete is not
performed and the available commands are displayed instead.
Auto-complete applies to these command elements only :
Command names. For example, typing net<Tab> auto-completes the command as network.
n
Parameter names. For example:
n
ping hostname int<Tab> auto-completes the parameter as interface.
l
system b<Tab> auto-completes the parameter as backup.
l
TX54 User Guide
Show Wi-Fi client mode connections.
Display all Wi-Fi access points.
Investigate a Wi-Fi access point
cp
help
ping
reboot
...
defaultip
wan1
wwan1
Auto-complete commands and parameters
ls
mkdir
rm
scp
defaultlinklocal lan1
wwan2
modem
show
980