Digi TX54 User Manual page 826

System administration
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the modem firmware check command to determine if new modem firmware is available
on local device.
For single-cellular variants, type:
n
> modem firmware check
Checking for latest ATT firmware in flash ...
Newest firmware version available in flash is '05.05.58.00_ATT_
005.026_000'
Modem firmware up to date
05.05.58.00_ATT_005.026_000
> modem firmware check
For dual-cellular variants, use either the name or the imei parameter to identify the
n
appropriate modem.
a. To determine the name and IMEI of the appropriate modem:
b. Use the name or imei parameter to query the Digi firmware repository for the
3. Use the modem firmware list command to list available firmware on the TX54 device.
TX54 User Guide
> modem firmwware check
Multiple modems available.
Please run the command with the modem identifier arguments
"name" or "imei"
to select a modem.
Available modems:
wwan2 (IMEI: 73342482496112) - Telit LM940
wwan1 (IMEI: 83152092446664) - Telit LM940
>
specified modem. For example:
> modem firmware check name wwan1
Checking for latest ATT firmware in flash ...
Newest firmware version available in flash is '05.05.58.00_ATT_
005.026_000'
Modem firmware up to date
05.05.58.00_ATT_005.026_000
>
Update cellular module firmware
826