Digi TX54 User Manual page 4

Revision Date
F
March 2021
TX54 User Guide
Description
Status > Modbus gateway page in the Web UI
l
displays information about modbus clients and
servers connected to the gateway.
show modbus command displays information
l
about the the Modbus gateway service.
Serial port enhancements:
n
Serial port logging options added for starting,
l
stopping, and viewing serial port activity.
Option added to the System > Serial configuration
l
page to copy serial port settings.
Policy-based routing enhancements:
n
Added a DSCP option to match the routing rule by
l
the type of DSCP field in the packet.
Added a Defaultroute option for matching policy-
l
based routes to the device's active default route.
Python pip support for installing external modules and
n
libraries.
Link speed and duplex options added to Ethernet port
n
configuration.
ssh and telnet commands added to Admin CLI.
n
Services > Ping responder allows you to control the
n
interfaces and firewall zones on which the DAL device
will respond to ICMP requests.
Enhanced policy-based routing:
n
Added a DSCP option to match the routing rule by
l
the type of DSCP field in the packet.
Added a Defaultroute option for matching policy-
l
based routes to the device's active default route.
Added a link to User Guide under the User menu in the
n
Web UI.
Release of Digi TX54 firmware version 21.2:
Enhancements to the location service:
n
The ability to define a static latitude and longitude
l
as a location for the device.
Reporting location information as health metrics to
l
Digi Remote Manager.
Geo-fencing: Allow you to define one or more
l
circular or polygonal geo-fence areas and then
perform a set of actions when the device enters or
leaves that area.
Python support for location information through
l
4