Table of Contents
Advertisement
Services
Additional configuration items
Additional remote hosts to which the location messages will be forwarded.
n
Location update interval, which determines how often the device will forward location
n
information to the remote hosts.
A description of the remote hosts.
n
Specific types of NMEA or TAIP messages that should be forwarded.
n
Text that will be prepended to the forwarded message.
n
A vehicle ID that is used in the TAIP ID message and can also be prepended to the forwarded
n
message.
Configure the TX54 device to forward location information:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Destination servers.
4. For Add destination server, click .
5. (Optional) For Label, type a description of the location destination server.
6. For Destination server, enter the hostname or IP address of the remote host to which location
messages will be sent.
7. For Destination server port, enter the UDP or TCP port on the remote host to which location
messages will be sent.
8. For Communication protocol, select either UDP or TCP.
9. For Forward interval multiplier, select the number of Location update intervals to wait
before forwarding location data to this server. See
information about setting the Location update interval.
TX54 User Guide
Location information
Configure the location service
for more
555
Advertisement
Table of Contents
