Routing
i. Click to expand Destination address.
ii. For Type, select Zone.
iii. For Zone, select CellularWAN.
6. Create a packet filtering rule that rejects all other LAN packets on the cellular WAN interface.
a. Click Firewall > Packet filtering.
b. Click the to add a new packet filtering rule.
c. For Label, type Reject LAN traffic to cellular WAN.
d. For Action, select Drop.
e. For Source zone, select Internal.
f. For Destination zone, select CellularWAN.
7. Click Apply to save the configuration and apply the change.
Command line
TX54 User Guide
IP routing
341