Table of Contents
Advertisement
Interfaces
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. If the device has more than one modem, identify the modem by using the name parameter, for
example:
> modem scan name wwan1
Issuing network scan, this may take some time...
Status
---------
Available
Available
Available
Available
Available
Available
>
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.
WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, click Status.
3. Under Connections, click Modems.
The modem status window is displayed
Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show modem
To view a status summary for all modems:
n
> show modem
Modem
-----
wwan1
wwan2
>
TX54 User Guide
Carrier
PLMN ID
Technology
--------
-------
----------
T-Mobile
310260
4G
T-Mobile
310260
3G
AT&T
310410
4G
Verizon
311480
4G
311 490
311490
4G
313 100
313100
4G
command:
SIM
Status
-------------
---------
1 (ready)
connected
1 (ready)
connected
Wide Area Networks (WANs)
APN
Signal Strength
---------
--------------------
1234
Good (-84 dBm)
1234
Good (-84 dBm)
103
Advertisement
Table of Contents
