Digi TX54 User Manual page 6

Revision Date
H
September 2021
TX54 User Guide
Description
Added commands for over-the-air (OTA) system
n
firmware update to check, list, and update to new
firmware from the Digi firmware server.
Added a show dns command to the Admin CLI to
n
display active DNS servers and their associated
interface.
Added a show ntp command to the Admin CLI to
n
display the status of the NTP service.
Expanded Port forwarding option to support a range of
n
ports, including one-to-one and many-to-one port
mappings.
Added options to control packet filtering for the
n
network analyzer.
VPN enhancements:
n
IPsec enhancements:
l
Added support for multiple remote endpoints
o
and the ability to use round-robin or to randomly
select an endpoint to establish a tunnel to.
Added configurable options to control IKE
o
transmit interval, tunnel retry interval, and
tunnel retry timeout.
LDAP enhancements:
l
Added a login attribute to provide the ability to
o
match the attribute set on an Active Directory
server.
SureLink enhancements
n
Added the ability to configure how many times a
l
SureLink test must run, and must fail, before the
interface is restarted or the device is rebooted.
Added the ability to configure how many times a
l
SureLink test must pass before an interface is
considered to be working.
Added the ability to test another interface's status.
l
SNMPv2 supported added.
n
Updated python to version 3.6.13.
n
Added the default digi.device local domain.
n
Release of Digi TX54 firmware version 21.8:
Added LXC container support for running localized
n
containers on the device.
Added support for maintenance windows triggers to
n
control when a device is available for Digi Remote
6