Table of Contents
Advertisement
Virtual Private Networks (VPN)
6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,
prior to the request expiring. This value is configured on the SCEP server, and is used by the
TX54 device to determine when to start attempting to auto-renew an existing certificate. The
default is 7.
7. (Optional) For CRL file name, type the filename of the Certificate Revocation List (CRL) from the
CA.
The CRL is stored on the TX54 device in the /etc/config/scep_client/client_name directory.
8. Click to expand SCEP server.
9. For FQDN, type the fully qualified domain name or IP address of the SCEP server.
10. For Password, type the challenge password as configured on the SCEP server.
11. Click to expand Distinguished Name.
12. Type the value for each appropriate Distinguished Name attribute.
13. Click Apply to save the configuration and apply the change.
Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
TX54 User Guide
IPsec
422
Advertisement
Table of Contents
