Table of Contents
Advertisement
Monitoring
12. Confirm that users who will use the Wi-Fi scanner server are members of an authentication
group that has Wi-Fi scanner access enabled. See
authentication group configuration information.
13. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
14. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Display the output of the Wi-Fi scanner.
You can use one of the following methods to view the output of the Wi-Fi scanning service:
From the Status page of the WebUI.
n
From the System Logs page of the WebUI. You can also search the output, as well as
n
download the output in text format, from the System Logs page.
From the command line when logged into the TX54 device.
n
From a remote host, by connecting to the TX54 device by using the scanning service's SSH
n
port.
To view the output of the Wi-Fi scanning service, you must first enable the service. See
Fi scanner
for instructions. For users to view the output of the Wi-Fi scanner, they must be a member
of an authentication group that has Wi-Fi scanner access enabled. See
for authentication group configuration information.
WebUI
To view the output of the Wi-Fi scanning service from the Status page:
n
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, select Status. In the Status menu, under Services, select Wi-Fi Scanner.
The Wi-Fi scanner page displays.
l
l
To view the output of the Wi-Fi scanning service from the System Logs page:
n
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, select System > Logs.
3. Click to expand Wi-Fi Scanner Logs.
TX54 User Guide
The output of the Wi-Fi scanning service is listed under Wi-Fi devices nearby.
If static transmitter filtering is enabled:
Devices that have been automatically determined to be stationary and therefore
o
filtered out of output log are listed under Blocklisted static transmitters.
Devices that have not yet been filtered out but are being considered for
o
automatic blocklisting are listed under Candidate static transmitters.
Enable the Wi-Fi scanner
Add an authentication group
Add an authentication group
for
Enable the Wi-
887
Advertisement
Table of Contents
