Digi TX54 User Manual page 423

Virtual Private Networks (VPN)
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add a new SCEP client:
(config)> add network scep_client scep_client_name
(config network scep_client scep_client_name
)>
4. Enable the SCEP client:
(config network scep_client scep_client_name)> enable true
(config network scep_client scep_client_name)>
5. Set the url parameter to the fully qualified domain name or IP address of the SCEP server:
(config network scep_client scep_client_name)> server url
https://scep.example.com
(config network scep_client scep_client_name)>
6. Set the challenge password as configured on the SCEP server:
(config network scep_client scep_client_name)> server password challenge_
password
(config network scep_client scep_client_name)>
7. Set Distinguished Name attributes:
a. Set the Domain Component:
(config network scep_client scep_client_name)> distinguished_name dc
value
(config network scep_client scep_client_name)>
b. Set the two letter Country Code:
(config network scep_client scep_client_name)> distinguished_name c
value
(config network scep_client scep_client_name)>
c. Set the State or Province:
(config network scep_client scep_client_name)> distinguished_name st
value
(config network scep_clientscep_client_name )>
d. Set the Locality:
(config network scep_client scep_client_name)> distinguished_name l
value
(config network scep_client scep_client_name)>
e. Set the Organization:
TX54 User Guide
IPsec
423